PortKeys BM5 5.2 Inch 2200nit 3G SDI/HDMI Touch Screen Monitor with 3D LUT,Wavaform,Camera Control Functions (for Tilta Nucleus M)

$519.00

    This fits your.
  • Make sure this fits by entering your model number.
  • 【Support 3d Lut Loading, Built-in Camera Control Module】 The LUT file format supported is 16/17/32/33/64/65 precision (LUT_3D_SIZE). This Built-in Camera Control module supports to control Z CAM, Canon, Sony, Panasonic, BMPCC cameras. Camera control: Take Picture, REC, AV, TV, ISO, Auto Focus, Zoom, Manual Focus, etc.
  • 【2200 Nit Brightness, 3.5mm Output Jack】 Portkeys BM5 Monitor is daylight viewable with an impressive brightness of 2200 nits and a 178° viewing angle. a 3.5mm output jack on the left side for you to control the sound.
  • 【Control and Power to Tilta NUCLEUS-N&M Focus Follow】 The Focus Puller interface on the back can control TILTA NUCLEUS-N&M Focus Follow, and power it. (Nucleus-Nano: Wireless Lens Control System; Nucleus-M: Wireless Lens Control System.) Note: Tilta Focus Puller Control is Not included.
  • 【All Aluminum Cover, Ultra-Heat Dissipation】 This camera monitor features aluminum cover and excellent heat dissipation which give the monitor effective protection and extend its working life.
  • 【Highly Precise Waveform, Power to Camera by Dummy Battery】 Equipped with five kinds of high precise oscilloscope function, including vector scope, RGB waveform, brightness waveform, RGB histogram and brightness histogram, and it supports freely switch during a variety of display modes, real-time present you with the most detailed and accurate image information. (*Support to output waveform SDI signal)

Brands:

Portkeys

Product Code:

B07VCR8H7W

Availability:

In Stock
Size:Gift Tilta Nucleus-M control cable

BM5

Parameter
*Screen Size:5.2"
*Dimension:137x83x31.5mm
*Viewing Angle:178°H/178°V
*Brightness(nit):2200
*Resolution:1920x1080
*Contrast Ratio:1000:1
*Weight:350g
*Color Depth:8bit
*Backlight:WLED
*Material:Aluminum alloy+Toughened glass
*Input Voltage:DC 7 -24V
*Power Consumption:16W

Camera Control

Camera Control for Z CAM
*E2(need LANC Control Cable )

Camera Control for SONY
*A9/*A7R3/*A7M3/*A7R2/*A7S2/*A6000/*A6300/*A6400/*A6500/*RX100/*RX02(need Control Cable for Sony)

*FS5/*FS7(need LANC Control Cable )

Note:
1.When controlling ISO/aperture,HDMI can not be outputSwitching to lens control interface the signal will return to normal 2.A7M3 should turn on PROXY record when recording 4K,otherwise HDMI can not be output in the recording mode.

Camera Control for Canon
*1D X MarkⅡ/*5D Mark Ⅲ/*5D Mark Ⅱ/*6D Mark Ⅱ/*6D/*80D/*EOS R (need Control Cable for Canon )

*5DS/*5DS R/*5D Mark Ⅳ(need Control cable for Canon 5D4)

*C700PL/ *C700GSPL/ *C300 Mark 2/ *C300 Mark 2 PL/ *C200 /*C200 B / *C100 / *C100 Mark 2 (need LANC Control Cable )

Panasonic (need Control Cable for Panasonic)
*GH4/*GH5/*GH5S

Blackmagic(need LANC Control Cable )
*BMPCC/*URSA MINI

Tilta
*NUCLEUS-N (need Control cable for Titla NUCLEUS-N ) *NUCLEUS-M (need Control cable for Titla NUCLEUS-M )


Product information Size:Gift Tilta Nucleus-M control cable ASIN B07VCR8H7W

I purchased this monitor over a month ago before the BM5 II (5.2" 2,200 nits) was announced. This monitor is a powerful 2000 nits 13W. I love that the body is solid and not plastic, and that it doesn't really weigh too much on my handheld rig, even with a big battery. I purchased it together with the Nucleus nano cable so that I could use the touch screen feature to focus my cinema lenses. I have to say that with the current firmware it is a little hard to full focus manually, but it is great to use it as a programed motorized pull focus from point A to B. You can time how fast you want it to focus from those 2 marks with no hassle - way better than using the nano wheel to program the 2 focus points. I will barely use this future, but it would work great for someone doing detailed work with motion control systems. I am very excited for the announcement of the Bluetooth module that will let me control my black magic camera pocket. Most other cameras can be controlled with the cable you can purchase and use the touch screen, so once that module is released I too will be able to really use this monitor to it fullest potential. I am giving it 4 of 5 starts only because it does have a loud fan noise, but only when viewing at 2000 nits, and because I am not sure on the color calibration being 100% accurate. But for this price point this little unit is amazing! The fan noise is non existent when using the monitor on low brightness, and barely noticeable at medium brightness setting. My guess is that the low is around 500 nit, and Med is around 1,000 nits. I have used this on a hot day at the beach without an overheating problem. It does get really hot to the touch tho, but so do most bright monitors. This item is discontinued since the new release of the 2200 nit version, but all other features are the same to my understanding. The new one is 16w, rather than 13w. I would recommend this monitor to anyone looking for a 5 Inch bright and solid monitor. It even does anamorphic squeezing at any ratio, which is not always advertised on their page. Great buy for the price.