Emart 6.2ft VR Gaming Stand with Adjustable Vive Mini Ball Head for Video, HTC Vive VR, Portrait, Product Photography, etc. (2 Pack)


    This fits your.
  • Make sure this fits by entering your model number.
  • Perfect design of light stand kit for matching the HTC Vive, DSLR and other photography equipment compatible.
  • Aluminum alloy construction, lightweight but sturdy and portable, carrying it out in the field.
  • Height adjust from 26.8’’ to 75’’. Max load capacity 13.5 lbs. Set up easily in a matter of seconds.
  • 3 legs stages, pretty stable with a good center of gravity, the footprint size about 4.6 sq. ft when fully extended.
  • The mini ball head mount adapter fit for standard 1/4 inch thread on the stem, it can withstand heavy load, lock solidly, and swivel devices smoothly.



Product Code:



In Stock
emart VR Gaming Stand

This light tripod stand kit offers you perfect VR experience when you attached to HTC Vive VR on the mini ball head mount adapter.

  • Set up easily in a matter of seconds and also disassemble for storage.
  • As well as perfectly use for photo/video studio shooting and on-site, match the DSLR and other photography equipment compatible.
  • High quality aluminum alloy construction gives it lots of advantages, such as lightweight, portable, sturdy, stable and other you expected.

stand of HTC Vive VR

stand with mobile phone

stand of projector

Strobe light stand

Mount Sensor to Ball Head

Adjustable swivel head allows you to precisely adjust to play in any space

Mount Phone Holder to Ball Head

Adjust the height and angle of the mobile phone, take photos or live streaming from any angle

Mount Projector to Ball Head

Adjust the height of the projector to suit the projector screen of different heights

Mount Camera Flash to Ball Head

Fixed camera flash to prevent camera shake and adapt to extreme distance shooting

Read more VR Sensor Stand Kit

VR Sensor Stand Kit

Ideal for pairing with the HTC Vive and Oculus Rift sensors for temporary or permanent gaming set-ups

HTC Vive base station is not included.

Read more


  • (2) x Photography Light Stand

Aluminum Alloy Construction

Slip Resistant Rubber Tipped Legs

Sections: 3

Max Height: 75''

Min Height: 26.8''

Folded Height: 26.8''

Net Weight per Light Stand: 2 lbs

Max Load Capacity: 13.5 lbs

Footprint Maximum Diameter: 29''

  • (2) x Mini Ball Head Mount Adapter (Hot Shoe Adapter)

360° Swivel

Screw Mount: 1/4'' thread

Net Weight per Adapter: 0.2 lbs

Product information Product Dimensions 27.56 x 5.91 x 3.15 inches Item Weight 4.89 pounds ASIN B074R9SQBY Item model number 4332264925

Okay, okay, I get that I'm leaving a review before I've really used them, but they seem very wobbly when extended fully. They're quite thin, which could be the reason why. HTC recommends the Vive lighthouses to be mounted about 6.6' or higher, which is a bit above what these tripods can get to in the first place, but shouldn't be a problem if they're stable. I'm also using the sync cable instead of syncing wirelessly because the bases are a bit too far apart for that (also recommended to use if they're mounted below ~6.6'). At the distance they're at they were working great on the shelves they were on before I got these stands.

If these end up being wobbly in use it'll throw tracking off terribly and probably make you sick since the world around you will end up wobbling along with it. My VR setup is in the basement, though, so the concrete floor shouldn't shake when I move around.

Unfortunately life leaves me with little time to play games anymore, so I'll update this after I eventually spend a few hours using them.

Initially, my first order came with one damaged stand, but they did the right thing and fixed the situation, so thumbs up for great customer service!

The stands have decent quality 3/5, and they are very easy to use. I'm using the two stands with Speedlite's and Softboxes on them.

The weight of the stands is decent, it's not heavy, neither is it too light to get easily blown away. Ideally they should be slightly heavier for slightly more security, but it's really not bad, specially if you have the legs stretched wide.

These telescopic stands are the best product imaginable. They are lightweight and easily fold together to fit into a small bag. They have allowed me to take my Virtual Reality headset to friends' houses and still play with high-quality tracking. They are completely adjustable so you don't need to worry about the height of the room you are playing in. The tip on them is also on a ball joint, so you can adjust and orient your base station anyway you desire.

We received a new HTC Vive setup and before physically mounting the lighthouse sensors we wanted to be able to move them around and get a feel for where we wanted them. These did the tricks until we went for a more permanent solution.

I got it for Vive sensors. I was figuring it would be super cheapy feeling but was surprised they aren't that bad.

Bought these to mount VR sensors to so I didnt have to put holes in the walls. They extend beyond 6ft- smoothly, each section locks firmly, the legs are sturdy and durable. Setting up and taking it all back down is a quick process, as each section slides into the next without much resistance or fear that it could bend. I'd highly recommend these. They are every bit worth the price.

I got these for the base stations of my Valve Index VR system and they work perfectly! They are lightweight, easy to move around, yet VERY VERY hard to knock over. I've bumped into them a couple times expecting them to fall, but they are incredible sturdy-- the tripod base holds up really well. If you want to avoid mounting the Base Stations into your wall, getting these is a no-brainer, with great bang for your buck.

Not much more to it. They do what they need to. They are made out of aluminum so they are sturdy and strong. These are exactly what I was looking for and happy I purchased them.