1.Stereo Bluetooth playing
2.Maglev design, 360° surround, to avoid the resonant noise.
3.Class D digital power amplifier system, combined with the speaker characteristics, through the DSP (digital signal processor) electronic crossover design, making sounds smooth and natural.
Output power: RMS 10W
Signal to noise ration: ≥85dB
Drive unit: 52mm
Audio input: Bluetooth CSR8635 V4.0
Frequency response: 150Hz-20KHz
Power supply: Base: DC 12V 2A adapter
Speaker: Polymer lithiumbattery 3.7V 1200mAh X2
Product size: Base: 140*140*27 mm
Ball speaker: φ 100mm
How to float the speaker orb
1.Please place the base on an absolutely horizontal surface. If the surface is not flat and horizontal, the speaker orb can not levitate normally.
2.Connect the power adapter to the base power port "Input"
3.Turn on the speaker orb and pair with the bluetooth of smart phone/tablet.
4.Hold the orb with your two hands and put your fingers under the orb to hold tight the orb, move the orb vertically downwards the center of the base.
5.Make the orb approach the center of the base slowly, and please move it towards left and right, or front and back to try to get the levitating point.
6.When you feel a strong force which is holding the orb from the base, this position is the levitation place, release the orb gently.
1x Bluetooth Ball Speaker
1x Speaker Charging Cable
1x DC 12V adapter
1x Silicon Holder for Speaker 1x Charging cradle
|Product Dimensions||5.51 x 1.06 x 5.51 inches|
|Item Weight||2.43 pounds|
|Item model number||5817610|