Universal TV wall mounting bracket design fits most of 23-42" LCD/LED/Plasma TVs on the market up to VESA 200x200 and 66 lbs (Fits VESA 200X200, 200X100, 100x100, 75x75 mm). Please check VESA (mounting hole pattern behind TV), stud spacing, possible blocked cable/input and TV weight prior to making purchase decision to determine whether this TV wall mount fits your TV and the installation application.
This wall mounting kit is compatible with Samsung, Sony, LG, Sharp, Insignia, Vizio, Haier, Toshiba, Sharp, Element, TCL, Westinghouse 23, 24, 27, 30, 32, 36, 37, 40, 42 inch TVs. Please ensure your TV has VESA 200 pattern or smaller.
Tilt, Swivel, Articulate, Extend, Collapse with this universal TV wall mounting bracket. Full motion capability makes is ideal for corner installation, over a fireplace, inside a TV center. TV stays as close as 4" from the wall or can extend up to 15.5 inches. Swivel left or right 180 degrees. Effortless 180 swiveling capability gives you the best view from any seat in the house.
Continuous Tilt Feature (up to 20 degrees down or up) for Better Viewing Angle and Reduced Glare. Low-profile design ensures TV is close to the wall for a sleek finish.
Weight rated to 66 lbs. This single stud wall mount is sturdy enough for most of the LCD and LED TVs on the market. Install your precious TV with confidence. Constructed from Reinforced Steel. Quick and easy to install - bracket comes complete with full instructions and INSTALLATION HARDWARE.
Mount-It! Full Motion TV and Monitor Wall Mount With Single Articulating Arm
Mount-It! full motion articulating TV wall mount offers extreme versatility with a maximum extension of 15.5" from the wall. This mount is ideal for installations where the TV needs to be swiveled significantly for various seating arrangements.
ValueMax brings you this Mount-It! wall mount at a great value. You don’t need to pay a huge sum to install your small to medium size TV. MI-02-223 provides you all you need, without the hefty price. Compare the price to any other similar articulating TV wall mount on Amazon.
This single-arm articulating TV wall mount is perfect for smaller flat screen TVs or for desktop computer flat screen monitors. This mount swivels and tilts, and fits flat against the wall or extends to 15.5 inches.
Its articulating arm design is incredibly sturdy, and supports a wide range of LCD, LED flat screen TVs. Mount swivels from left to right for viewing from multiple angles. Continuous tilt motion is possible without the use of tools. Powder coated steel construction provides a sleek, high-tech look. Ideal for corner installations.
Fits most of 23-42" TVs.
Collapses to 4" low profile, Extends 15.5" from the wall.
Tilt, Swivel and Extend/Collapse function.
Easy tilting angle adjustment.
Heavy duty steel construction and high-tech welding technology.
Includes all necessary mounting hardware.
TV Size Range: 23" - 42" (depending on VESA bolting pattern and the TV weight).
Max TV weight: 66 lbs
Mounting Pattern: (Fits VESA VESA 75x75, 100x100, 200x100, 200x200.
Wall plate dimensions: 1.3" wide by 8" high.
Tilt: up to 20 degrees down or up and any angle in between
I previously purchased the Peerless mount that is similar to this one... never had any issues with the Peerless... mounting a 40 inch flat panel. Decided to purchase this mount to save a few bucks... this mount is very cheaply made compared to the Peerless so I understand the price difference. The tilt mechanism is flimsy and poorly designed and the mount itself is made out of thin, stamped steel. I will never trust any but the smallest monitors and flat panels to this flimsy mount. I think the weight "rating" listed is way over what this mount should support since my 32 inch flat panel feels like it is mounted on rubber when extended just a few of the 15 inches this mount can go to. The cable management hardware is thin plastic and snapped when I tried to spread it open to insert the cables. There was no bubble level included as a previous reviewer stated and the hex wrenches included for adjusting the tension on the swivel joints are too small for the size hex hardware used on the mount! If you want your tv or monitor to stay on the wall, spend the extra and get the Peerless.
I have this mounted to the side of a bookcase to carry a 27" computer monitor, and it blocks my top shelf but can be moved out of the way as necessary to access the shelf. I'm back to order another mount for the other side of the bookcase for a second monitor.
Probably the best way to set this up is to remove the pins at the mount end, and tape the plastic spacers on, attach the mounting plate to the wall, then attach the TV or monitor (I used this for a computer monitor) to the VESA end with the appropriate spacers and screws, and then lift the TV and arm portion of the mount, up and drop the pins into the mount. Secure the pins with the provided allen wrenches.
What I like about it most is the head end will pivot and can be set level very easily.
The swivel mount on this item is poorly designed - if you tinker with the placement of the monitor, it will lock with the monitor facing up. The screw to fix this is designed to be turned with your hand, but it locks up. The only way to get the monitor tilted down is to wiggle the monitor back and forth and cross your fingers. I would return this, but it's already screwed into the wall. Will not buy this brand again. Cheap and defective.
The articulated swing out arm part works well. The problem is with the vertical tilt up/down bracket. The stationary part has pairs of little nubs that should mate up with protrusions on the moveable part. But the spacings are different so they don't mate up. The result is that the TV doesn't stay put. Plus the knob to tighten up the tilt movement is pretty in accessible. Since the nubs don't line, you have to tighten it with pliers to keep it from being loosey-goosey. But you can't get a grip on the knob without taking the bracket apart. They almost got it right. OK for the price
I was looking for a simple, low-profile articulating wall mount for my Samsung 32in TV Samsung UN32J5205 32-Inch 1080p Smart LED TV (2015 Model). The wall mount has a small footprint which was important for me. The dimensions are: 1.3" in wide by 8" tall. Installation was quick and easy, I installed it by myself, the TV weighs 8.3lbs so it was not bad. I like the mount, I have only 2 negatives: 1) as others have mentioned. - the tilt lock mechanism is garbage. for my TV it works, but for a heavier TV I would not recommend this mount. I really had to wrench it down hard 2) the mounting screws for the TV. My TV required using the 4 larger/thicker screws, they are too short. They actually reach and can get a couple of turns into the mount but that is about it. For me, it just doesn't feel safe enough. I will need to get longer screws.
Overall, I like the product and the price was great. I just wish the tilt lock mechanism was better.
A little stiff here and there, difficult to fine tune with the Allen keys. One Allen key actually stripped out completely after less than one bolt. I guess I don't know my own strength. That or my puny arms are weaker than the malleability of steel. Who would've thought.
Anyway, cord management system broke while trying to assemble it. And remember, I have dainty arms so it's not like I was being rough with it.
Very solidly built, heavy, comes with lots of bolts, none of which fit, but that was the TV's fault and not the TV mount. I like to spread the blame on these types of things.
TV has been mounted for a month, moved around multiple times, and has not fallen. 8/10
I bought this and installed it to hold up a TCL 4K TV and as it turns out the screws that fit the TCL do not fit through the holes in this mount. This was all despite ensuring VESA 100mm compatibility. I would attempt to return it if it were not already mounted on my wall...
We wanted to get a small tv that we use as a monitor off the desk area for more surface space. We also needed one that swivel because it's in a weird space, not a corner, but in front of a shelf. This one sits nicely out of the way but also comes out a bit to be able to be viewed from different angles. We attached a 21 inch Vizio smart tv.
Great item that comes with everything you need right in the box! There were three different sizes of screws to fit into the back of the TV to mount it as well as washers and drywall plugs.
I was extremely impressed and would definitely look to this brand again for my next mount.
A very good mount bracket for the cheap price. Very good build quality, the monitor doesn't sag and they supply you with all the washers, screws and anchors for different mounting configurations. The wire management clips they provide are very helpful.
I think it would have been convenient if a small level was included to help mark the drill holes.
All in all, I recommend this product and I would buy this again if I needed to.
Installation was easy enough.. using it to mount a 32" Samsung Smart TV at the moment. There is little wobble to it. Would be nice to have a bit more angle choices in terms of up-down rotations. Great so far though!
Does the job. Very sturdy - good range of movement although tilt up and down is minimal. It was very stiff at first - needed to loosen slightly and wd40 it but works well after that.
Use in our camper.
Really great one! It's solid and it works perfectly for my 32 ''
Good for the price. A little flimsy with only a small plastic nob holding the tv rails to the mount...
love the mount, installed it in my rv with a rca 32'' led tv and no sagging and works well.
Does the job. I used it for a 19" TV in my bedroom.
Great price, and Works perfect as described Thx. A++
Unit came with all the required mounting hardware and was of a excellent build quality, mounted my 32" LG television beautifully.
Ce support est parfait et reçu livré rapidement.
Very good!! Heavy and very solid it's great for my 36"