DRILI make life betterRead more
Built-in ceramic Laminated antenna , 10 meter transmission barrier-free without dead angle , do not miss every note . Supported switch 、pc、ps4 、etc .Read more
Latencies of differret Bluetooth protocols , The less latency , the better audio synchronous transmission
Low latency transmission can be available only when both bluetooth adapter and headset support aptx LL or aptx .
Bluetooth headset with aptx LL or aptx technology is recommended for music games .Read more
Turn on the Bluetooth headset and set it to pairing mode
Insert the Bluetooth receiver , press and hold the pairing button for 4 seconds , the LED corresponding to white flashes , and enter the pairing mode.
The indicator light turns solid white,and the pairing is complete and can be applied.
Note : A and B keys have the same pairing method
You can pair A Headset and then pair B headset,and connect two Bluetooth headsets at the same time .
the earphones that have been paired can be used again without pairing again , just plug in the Bluetooth receiver .
1. Product Name：Bluetooth Audio USB Transmitter
2. Applicable platform：Nintendo Switch/PS4/PC
3. Bluetooth version：BT5.0
4. Product size：48*14*19mm
5. Working frequency：2.402-2.489GHZ
6. Working distance：10m
7. Working voltage：5V
8. Working current：<20MA
9. Supported Protocols：SBC/APTX/APTXLL
Note: A and B keys the same time pairing method（Two Bluetooth devices need to be the same batch of products） You can pair the A terminal first and then the B terminal. (When the second Bluetooth device is paired, the first Bluetooth device will be disconnected, but the first device will automatically connect back) Connect 2 Bluetooth devices at the same time. Bluetooth devices that have already been paired can be used again without being paired again, just plug in the host.
1 X Bluetooth Adapter
1 X TYPE-C to USB
3.0 Adapter 1 X User Manual
The good thing about this adapter is that it’s thin and easy to use. It took a couple of tries to connect my headphones the first few times but it’s easy pairing after that. The adapter is super thin and convenient when the switch is on docked mode