GoHonor Mount Bracket for Blink XT and Blink XT2 Camera
Unique Design:A pop-up inner box design When you push the inner box, you can easily take out the Blink XT camera and replace the batteries,No need to reset the bracket direction,Unique opening is designed at the back for easy wire management!
GoHonor blink Module holder for Blink Sync Module, helpful for Keep your surroundings neat and comfortable
- 360¡ãrotation adjustment viewing angle without blind spot left. Ensure all your household safety in an all-round way
- protection for your camera against the outdoor UV/sun/rain/wind/dust and any sudden attack from indoors or outdoors
- Eliminate cable clutter
- Ideal for limited space
- Keep Blink Sync Module safe
5*GoHonor Mount Bracket for Blink XT
1*GoHonor mount holder for Blink Sync Module
1*Short USB charging cable
1*User Manual Guide
The BlinkXT/XT2 and Sync Module is NOT Included
These cameras are good. Batteries do not last too long especially when it is cold (lithium) or when they go off to often. Cameras are also in and out working/not working.
I did not get everything that I ordered. No cameras, no batteries & no receiver. I don’t know what’s going on. But it will be returned. Not happy! This was recommended by a couple that likes it.
The all plastic unit is cheaply made but works as advertised. The latch that lets one get into the battery box is flimsy and does not work well at all if ever again. When these batteries wear out I don't know if I can open it up without smashing the unit. Typical of a product made in China.
Had another similar brand where the Blink cameras “sat” in a casing, but it was extremely hard to snap on/off the cover. Purchased these because they seemed a little different. Well, absolutely love the fact that the cameras slide in the casing and best of all.....the case then clicks into the housing. So much easier. Also, when time to change the batteries, just push in the case and it pops out. You can leave the rest of the housing in place.
This is an awesome, inexpensive accessory to your Blink camera system, it is such a great idea and I think Blink should consider including this as part of their systems.
I bought this and the wall mount for the module when I purchased the Blink Camera system. I negative - the Philips-heads in the screws provided will not hold up to a power tool. It's a common size, you probably have plenty (three per unit) in a drawer somewhere. Or, be smarter than me and drill a pilot-hole! Secure but very easy to use, one-click to install or remove the camera from the hood for battery service. There's also a slot for the "hard-wire" option to the camera; this will provide additional protection, which you initially lose by installing the cable through the back of the camera.
Blink system is very convenient install and will provide good quality images. You are only limited by range to the host module and wi-fi. This works well for my need and am very happy with the install. Down sides are that there is a slight delay in motion trigger and I do lose one camera occasionally due to wi-if connection. For some reason it varies between strong and week in a random pattern I have not been able to figure out. One option is to move it closer to the core of my house. Video storage is free and can hold a lot. Great product
The idea of these mounts is cool but the quality is horrible because it’s mainly plastic
These have a much greater adjustment range than the XT2 wall mounts included with the cameras. My only regret is the camera case can be popped out of the weatherproof housing without any tools whatsoever. Hopefully no nefarious criminals catch onto this detail. I didn't have any trouble tigthening these up enough to lock in place.
So far so good. But you should really order the amazon mounts too. Not a lot of movement range as they are. But free storage is really nice.
Mount is ok but it will eventually break in long runs. The plastic is cheap. One of the mount is not have strength to hold the camera. Indoor use only not for outside
Product is great that it covers additional layer for the camera.
Perfect fit for the camera but somehow affects the clarity of the two-way audio sound of the camera.
Very poor quality. Not very sturdy material or lock down pieces
These cameras are fantastic. Great quality video both day and night. Easy to install and use. Highly recommend them for home or business. The free cloud storage is a huge bonus.
Simple and easy to install , I would highly recommend this product
Thought there was cameras but no there wasnt. So I'm am returning the parts
Design is not great, I fear they will break
Pretty happy with these mounts.
Great product easy to install,
I have not used yet since it is very cod out side. But I have used casing to hold the camera. it is pretty good I am planning to install during summer. Looks very good.
I recently bought these Blink camera mounts they fit the blink xt2 camera well and are easy to install and give a bit more protection and water protection.