028zzzStore

Ok. Sure, you can "fit" it in the case as long as you don't want to use the precut pieces. But, this is made for the smaller cameras and cases. The GoPro 7 camera and protective cases are larger than the older ones and simply don't fit into the precut pieces. I have a smaller case for the a GoPro 3+ and it works like a charm. I bought this one for my new GoPro 7 and no luck. I'm still looking for something that will fit and that is a larger platform for accessories.

Got this to carry my GoPro Hero5 Session and some equipment. Along with the camera I have a floating stick, a selfie stick, a quick clip mount, a head strap mount, the REMO (Voice activation remote device), the outside of the micro chip (could take another if I wanted), and a couple of charging cables. All fit pretty comfortably into this case--without a lot of room to spare. The precut sections are handy if not always exactly what is needed. The foam is very firm but still flexible. This does good for what I want but I can't hope to carry all the various devices to attach the camera to other objects. Need a much bigger container. I like this one because it is small, and keeps everything I want in one place.

Pros:
The material and zipper quality is very good, as it appears in the pictures.
Enough room for my gopro connectors and screws.
My selfie stick fits, the maximum length slot in this case is 8 3/4" long.

Cons:
This will not fit a waterproof housing. Even though the gopro is waterproof, I still prefer to use a housing.
This will not fit a hero 5 black stock mount and screw while it's attached to the gopro. You have to buy the smatree mount and screw, which is what is shown in the pictures.
SD card slots are quite tight. Like tight to the point that I'm concerned about forcing them.
Hero 5 black battery slots aren't the proper shape even though they still will fit.

I bought this case more as a "just-in-case" option for me (no pun intended). I really just needed something that I could use if I needed to take just my GoPro somewhere.

When I received the case, I was actually surprised at this nice it was. The case is made of a semi-hard shell, and has a soft-touch foam on the inside. It also comes with all of the foam included, with cutouts in it. This allows you to take out as much or as little odd the foam as you want, making it a very versatile case. You can also save those cutouts for future customization. This case fits both my Hero 3+ and my Hero 5, along with two batteries for each, and a few small accessories.

I ended up using this case more than I initially anticipated, and it is now one of my favorite gear packs. I would definitely recommend to anyone looking for a compact but versatile GoPro case.

Nice case. I purchased a Crosstour 4K action camera from Amazon for my trip to Hawaii and needed a case to store all the extra items like floating handle, extra batteries, battery charger and SD cards. The case is well made with a nice smooth acting zipper and feels like it will protect the camera. I especially like that the top inside mesh area that has a zipper so the items you put in there stay there. The pre-cut foam is good quality and easy to remove for arranging and adapting the layout for your requirements. I still have plenty of room to add some of the many mounts that came with the camera. . I gave it 5 stars for durability, because it feels solid, but if I have any issues using it on my vacation I will add to this review. I hope this was helpful

I have two Smatree G360 Carrying Cases that are great and needed one more for my growing action cam collection... was so hoping that this case would work but the sizing, construction and materials are no where close to the previous model I have. Specifically the new "hard" foam in the case is the deal-breaker as compared to the previous more spongy type as it is far too ridge and not forgiving to accommodate the gear I'm trying to protect from moving around. While not quite as large a case that I need... the closest case I can find with the the right type of foam and customization is the CamKix Large Case.

I picked this up for my new Crosstour CT9500 4K action cam. It fill all of the accessories that came with the camera (and there were MANY).
I was looking for a case that would not only hold many extra mounts, but a floaty grip as well. You can see by my picture, it all fits just perfect.

The outer shell is of a hard type material, so it will be able to withstand some banging around.
Inside is a full foam sleeve, with several thoughtfully arranged cut outs. You can mix and match however you want, depending on what you want to store. Everything fits very securely.

Inside the top zippered pouch, there was plenty of room to store the flatter things, like cables, zip ties, and dust cover housings.

Very happy with this purchase. I was looking for as small of a case as possible, while still being able to hold a floaty, and this fits the bill with great success.

Purchased this last year for my GoPro Hero4 Silver and a few accessories. It's a great little case. The outer shell is made of a durable material and I see it holding up well over time. There are plenty of removable foam slots for multiple configurations that suit your needs according to the gear you own. I had to cut out a small portion of the primary foam insert in order to fit my shutter trigger, but I'd rather modify it a little than carry the trigger separately. I have one GoPro, a floating hand grip plus shutter trigger, two batteries, a dual battery charger, and a couple micro-SD cards. With a little room for some more smaller items. The mesh, zippered pocket in the lid of the case is good for carrying cords and such. Since it's only mesh, I wouldn't put anything too big in there or anything with sharp edges. I think it would easily tear the mesh. I wanted a case that fit my gear, but wasn't much bigger because I knew I wasn't going to expand my collection of gear very much, so didn't want to carry around a bigger case than what I need. This is the perfect size for me.

Size was advertised as 10.6" x8.3" x2.8". INCORRECT !
The actual dimension is only 8.1" x 6.4" x 2.3".
Bought to fit Smatree S3C pole, it doesn't fit; even the dimension for S3C was incorrect.